I have tried installation of VSMP Foundation Free.
However, installation will not advance on the way.
I would like to know solution.
Errors that have occurred are as follows:
vSMP Foundation: 220.127.116.11 (Jul 04 2013 23:09:05) FREE
1 * Proc. + I/O + Memory board
1 * Memory board
Processors: 1 (out of 2) Cores: 4 (out of 8)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz Stepping 02
Link Rate: 40Gb/s
CPU num.: 0@0[0@0]
1. Stopping local CPUs and other boards
2. Saving failure information
The above phenomenon does not occur in vSMP installation for the first time.
OS starts successfully in the first run.
And, vSMP also seems to operate normally.
However, if a server is rebooted, it will become an error during starting of vSMP.
Could I have you look into the cause?
Machine specification is as follows:
CPU：Intel Xeon E5620
InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s – IB QDR / 10GigE] (rev b0)
*The two servers same specs.
*The two servers are connected through a switch infiniband and same specs.